Model 160

Capacity: 65,000 LBS.

HOW IT WORKS

The key word is "simple". The operator backs the truck toward container/platform. With in-cab mounted controls, the operator switches on the power take off, lowers the hydraulic arm and engages the container/platform with the hook. He then activates the two main cylinders which pull the container onto the chassis and lock it into position. The operator then turns off the power take off and drives away.

ELAPSED TIME

Less than one minute from the time the operator shifted the truck into reverse.

Ampliroll has one major purpose: To help our customers pick up , drop off, transport, unload or dump containers, or equipment – safer and faster – and that means larger profits.

PULLS TRAILERS

1 TRUCK + 1 DRIVER + 2 CONTAINERS = TWICE THE PAYLOAD

AMPLIROLL IS VERSATILE:

• • With a container it is a roll-off

  • With a platform it is a flatbed truck

  • With a dump body it is a dump truck

  • With a recycling body it is a recycler

THIS MOST VERSATILE HOOKLIFT SYSTEM HAS UNLIMITED APPLICATIONS!

FACTS….About this truly unique system

• • The driver never leaves the cab --- this increases productivity and is safer.

  • DUAL main cylinders provide smooth, stable, power-on, power-off capability while the sliding jib allows for optimum weight distribution.

  • The operator can pick up or set down a container at dock heights or load and unload a second container onto an Ampliroll trailer.

  • Containers can be pushed and spotted more accurately, with little chance of damaging the fronts.

  • Truck alignment is not critical. The operator may approach from any angle within a 60 degree arc.

  • The Ampliroll is virtually maintenance free.

  • Once the container is loaded, it is supported throughout its length by the Ampliroll subframe.

AMPLIROLL MODEL 160/2000

LIFTING CAPACITY: 65,000 (including container)

DUMP ANGLE: 57 degrees

CYCLE TIME

(Pump speed @ 1500 RPM)

Loading (sec.) 32

Dumping 40

SHIPPING WEIGHT: 7,500 lbs.

HYDRAULIC SPECIFICATIONS:

Pump- Axial Piston –

5700 psi., 31 GPM @ 1500 RPM

Controls- low pressure hydraulic in cab

Reservoir – 17 gallons

Return line filter with replaceable cartridge

Maximum Operating Pressure – 5,400 psi

Arm Cylinders 2-160 mm bore x 2000 mm stroke double acting with built in by-pass values

Jib Cylinder 1-90 mm bore x 1255 mm stroke double acting

Stabilizer cylinder 1-98 mm bore x 170 mm stoke double acting

STEEL: SPECIAL ALLOY ASTM A 514 in jib, central arm and tilting frame
ASTM A 572 grade 60 type 2 in subframe

SAFETY DEVICES

Safety value prevents jib operation during dump mode.

Automatic locks on arm.

Slide through container catches.

Roller stabilizer

CONTAINERS: 20-24 ft., outside rail 36 ½ inch I.D. open top, compaction, tank or flatbed with "A" frame or crossbar pickup device

TRUCK REQUIREMENTS: GVWR 50,000 to 80,000 lbs.

Front axle capacity – 16,000 to 20,000 lbs.

Rear axle capacity 40,000 to 60,000 lbs

CAB TO AXLE (CA) WHEELBASE (WB) MINIMUM R.B.M.

Conventional 180 to 200 inch 240 to 290 inch 2,750,000 in lbs.

C.O.E. 175 to 190 inch 195 to 220 inch. 2,200,000 in lbs.

For service please call (613) 747-4666 or click here