Model 160/1700

Capacity: 50,000 LBS.

HOW IT WORKS

The key word is "simple". The operator backs the truck toward container/platform. With in-cab mounted controls, the operator switches on the power take off, lowers the hydraulic arm and engages the container/platform with the hook. He then activates the two main cylinders which pull the container onto the chassis and lock it into position. The operator then turns off the power take off and drives away.

ELAPSED TIME

Less than one minute from the time the operator shifted the truck into reverse.

Ampliroll has one major purpose: To help our customers pick up , drop off, transport, unload or dump containers, or equipment – safer and faster – and that means larger profits.

AMPLIROLL IS VERSATILE:

• • With a container it is a roll-off

  • With a platform it is a flatbed truck

  • With a dump body it is a dump truck

  • With a tank it’s a liquid transporter

THIS MOST VERSATILE HOOKLIFT SYSTEM HAS UNLIMITED APPLICATIONS!

FACTS….About this truly unique system

• • The driver never leaves the cab --- this increases productivity and is safer.

  • Maximum dump angle is almost 20% greater than conventional roll-offs.

  • The operator can pick up or set down a container at dock heights or load and unload a second container onto an Ampliroll trailer, allowing one truck and one driver to carry twice the payload.

  • Containers can be pushed and spotted more accurately, with little chance of damaging the fronts.

  • Truck alignment is not critical. The operator may approach from any angle within a 60 degree arc.

  • The Ampliroll is virtually maintenance free.

AMPLIROLL MODEL 160/1700

LIFTING CAPACITY: 50,000 (including container)

DUMP ANGLE: 51 degrees

CYCLE TIME

(Pump speed @ 1500 RPM) Loading (sec.) 28 Dumping (sec.) 34

SHIPPING WEIGHT: 6,300 lbs.

HYDRAULIC SPECIFICATIONS:

Pump- Axial Piston, 5700 psi.., 31 GPM @ 1500 RPM

Controls- low pressure hydraulic in cab

Reservoir – 17 gallons

Filters – suction line filter and high pressure strainer

Maximum Operating Pressure – 5000 psi

Arm Cylinders 2-160 mm bore x 1700 mm stroke double acting with built in by-pass value

Jib Cylinder 1-90 mm bore x 1225 mm stroke double acting

STEEL: SPECIAL ALLOY ASTM A 514 in jib, central arm and tilting frame

ASTM A 572 grade 60 type 2 in subframe

SAFETY DEVICES Safety value prevents jib operation during dump mode.

Automatic locks on arm.

Slide through container catches.

CONTAINERS TANKS, 20-24 ft., outside rail 36 ½ inch I.D. open top, , PLATFORMS, ETC. compaction, tank or flatbed with "A" frame or

Crossbar pick up device

TRUCK REQUIREMENTS: GVWR 50,000 to 70,000 lbs.

Front axle capacity – 16,000 to 20,000 lbs.

Rear axle capacity 40,000 to 60,000 lbs

CAB TO AXLE (CA) WHEELBASE (WB) MINIMUM R.B.M.

Conventional 175 to 190 inch 240 to 270 inch 2,500,000 in lbs.

C.O.E. 170 to 185 inch 190 to 210 inch. 2,000,000 in lbs.

For service please call (613) 747-4666 or click here